VG Series 50 Taper Bridge type Machine with Auto Pallet Changer System (2 APC) this machine has all the power and rigidity you need.
OKK VG Series
Specifications
VG5000
| Item | Unit | Specification | |
| Travel | Travel on X axis (Saddle: right/left) | mm | 760 (29.92″) |
| Travel on Y axis (Table: back/forth) | mm | 900 (35.43″) | |
| Travel on Z axis (Spindle head: up/down) | mm | 610 (24.02″) | |
| Travel on A axis (Table tilting) | deg | -120 to 30 | |
| Travel on C axis (Table turning) | deg | 360 | |
| Distance from table top surface to spindle nose | mm | 140 – 750 (5.51″-29.53″) | |
| Table | Table (Pallet) work surface area (X-axis direction x Y-axis direction) | mm | 500 (19.69″) and 500 (19.69″) |
| Max. workpiece weight loadable on table (pallet) | kg | 600 (1323 lbs) (for indexing) | |
| Table (Pallet) work surface configuration (nominal screw-hole size X number of holes) | M16 X 24 holes | ||
| Distance to the table work surface from the floor | mm | 1280 (50.39″) | |
| Pallet exchange time | sec | 16 | |
| Spindle | Spindle speed | min’1 | 35 to 12000 |
| Number of spindle speed change steps | Stepless (electrical 2 steps) | ||
| Spindle nose (nominal number) | 7/24 taper, No. 50 | ||
| Spindle bearing bore diameter | mm | Ф100(Ф3.94″) | |
| Feed Rate | „ … X, Y and Z axes: | m/min | 24 (945 ipm) |
| A and C axes | min_1 | A: 20 C: 30 | |
| Puttinn fepri ratp L X‘ Y and Z axes: | mm/min | 1 to 24000 (0.04 to 945 ipm) *1 | |
| A and C axes | min_1 | A: 20 C: 30 | |
| Automatic Tool Changer | Tool shank (nominal number) | JIS B6339 BT50 | |
| Pull stud (nominal number) | OKK only 90° | ||
| Number of stored tools | tools | 40*г | |
| Maximum tool diameter (with adjacent tools) | mm | 0115(04.53″) | |
| Maximum tool diameter (without adjacent tools) | mm | 0230 (09.06″) | |
| Maximum tool length (from the gauge line) | mm | 400 (15.75″) | |
| Maximum tool weight | kg | 20 (44 lbs) | |
| Tool selection method | Address fixed method | ||
| Tool exchange time (tool-to-tool) | sec | 4.5 | |
| Tool exchange time (cut-to-cut) | sec | 10 | |
| Motors | For spindle (25%ED/30-min rating/continuous rating) | kW | 45/30/26 (61/41/35 HP) |
| „ . . X, Y and Z axes | kW | FANUC: 5.5 X 5.5 X 5.5 (7 X 7 X 7 HP) | |
| A and C axes | kW | FANUC: 5.5 X 5.5 (7X7 HP) | |
| Required Power Supply | Power supply | kVA | FANUC: 64 |
| Supply voltage x supply frequency | VXHz | 200±10% X 50/60±1 220±10% X 60±1*3 | |
| Compressed air supply pressure | MPa | 0.4 to 0.6 (58 to 87 psi)*4 | |
| Compressed air supply flow rate | Umin(ANR) | 500(132 gpm)*5 | |
| Tank Capacity | Coolant tank | L | 380 (100 gal) |
| Spindle head cooling oil tank | L | 72 (19 gal) | |
| Hydraulic unit tank | L | 20 (5 gal) | |
| Machine Size and Required Floor Space | Machine height from the floor surface | mm | 3805 (149.80″) |
| Floor space required for operation (width x depth) | mm | 3794 X 4260 (149.37″ X 167.72″) | |
| Floor space including maintenance area (width x depth) | mm | 4600 X 5000 (181.10″ X 196.85″) | |
| Machine weight | kg | 25000 (55100 lbs) | |
| Controller type | F31 i-B5 | ||
| Temperature of operation environment | 5 to 40 | ||
×