What is the value of the Hartford F1 series that sets it apart from conventional vertical machining centers?
Why is the Vertical Machining Center series Hartford F1, table different from any other competing model on the market?
The reason, above all, is our strong commitment to design and manufacture the world's highest level Vertical Machining Center. To fulfill this ambition, Hartford R&D engineers have created many new design features that demonstrate the fully unique value of the Hartford F1 series. These exceptional or patented features make the new F1 Series unique in the global vertical machining center market.
The advanced CNC system "FANUC OiMD" is the latest development. 2 year warranty.
ASI (Automatic Tool Change): 24 positions, with a manipulator arm, Tool change time 1.18 sec. (tool-tool)
Spindle: Power 11 kVt, cone BT40, high torque 70 Nm Fully enclosed fence of the working area (with roof).
With units for supplying coolant through the Spindle and flushing the chips with a jet of coolant.
• Processing time is significantly reduced and product quality is improved
• High rapid movement speed 32,000 mm / rpm1 • Low noise level due to patented design: noise 50 ~ 70 dB
Hartford F1/LG Series
Description
Specifications
| Machine Model LG-500 | |||
|
Table
|
Working surface | 620×420 (24.41×16.54) | mm (inch) |
| Max. table load | 300 (661.39) | kg (lbs.) | |
|
Travel
|
Longitudinal travel(X-axis) | 520 (20.47) | mm (inch) |
| Cross travel(Y-axis) | 420 (16.54) | mm (inch) | |
| Vertical travel(Z-axis) | 450 (17.72) | mm (inch) | |
|
Spindle
|
Spindle nose taper | #40 | |
| Spindle speed(Pulley) | 8000 opt.10000/12000 | rpm | |
| Spindle speed(DDS) | 10000 opt.12000 | rpm | |
|
Feed
|
Rapid traverse rate(X/Y/Z)
|
32/32/32 opt.40/40/32 | m/min (ipm) |
| (1259.84/1259.84/1259.84, opt. 1574.8/1574.8/1259.84) | |||
| ATC | Tool storage | A:24 | pcs |
| Model LG-500 | |||
| Work zone | Working surface | 620×420 (24.41×16.54) | мм (in) |
| Maximum load of the working surface | 300 (661.39) | Kg (lbs.) | |
| Moving | Longitudinal movement along the axis X | 520 (20.47) | мм (in) |
| Longitudinal movement along the axis Y | 420 (16.54) | мм (in) | |
| diagonal movement axis Z | 450 (17.72) | мм (in) | |
| Spindle | Spindle taper | #40 | |
| Spindle speed (шкива) | 8000 opt.10000/12000 | rpm | |
| Spindle speed (DDS) | 10000 opt. 12000 | rpm | |
| Innings |
Rapid traverse speed(X/Y/Z)
|
32/32/32 opt.40/40/32 | м/rpm (ipm) |
| (1259.84/1259.84/1259.84, opt. 1574.8/1574.8/1259.84) | |||
| Tool | Tool storage container | A:24 | PC. |
Complete set
Standard delivery set:
- Full safety fence
- Automatic lubrication system
- Work area lamp
- Innings с Compressed Air Through Spindle
- Leveling blocks and bolts (kit)
- Automatic voltage cut-off
- signal lamp ending Processing
- Operation manual and wiring diagrams
- Tank For сОЖ
- For coolant nozzles around the spindle
- Screen with high speed and high precision parameters
- Display For Tool Store
Options (up to additional Equipement on request):
- Full protection of the working area
- Rotary with Table с CNC(NC)
- positioning system with linear encoders
- Chip auger mounted at the front
- Lamellar chip conveyor
- Chip flushing device
- Measuring the overhang (length) of the Tool
- Automatic workpiece measurement
- Software options
You can get additional information from our managers.
Please note that the manufacturer may change the design and specifications сout prior notice.
×